East Brighton house

From Greenlivingpedia, a wiki on green living, building and energy

(Difference between revisions)
Jump to: navigation, search
Revision as of 20:55, 27 September 2007 (edit)
Rjanson (Talk | contribs)
m
← Previous diff
Revision as of 20:56, 27 September 2007 (edit) (undo)
Rjanson (Talk | contribs)
(Solar hot water)
Next diff →
Line 15: Line 15:
It turned out there was 115 square metres of insulation required. I used R3.5 polyester insulation. I had my handy man install it. He took off some roof tiles in order to get the bats into the roof. [reminder to self to add cost info] It turned out there was 115 square metres of insulation required. I used R3.5 polyester insulation. I had my handy man install it. He took off some roof tiles in order to get the bats into the roof. [reminder to self to add cost info]
-==Solar hot water==+==Solar hot water (actively investigating)==
I investigated solar hot water systems and I read a bit on evacuated tube systems, which claim to be more efficient. I investigated solar hot water systems and I read a bit on evacuated tube systems, which claim to be more efficient.

Revision as of 20:56, 27 September 2007

As you can see , this is a very stock standard 1950's style aussie brick veneer.

The question is what can one do you do with this sort of home to make it more efficient and water wise?

The first thing I did was to sign up for Green Power. I am currently with AGL but decided to go with 100% Green Power Option with Jack Green. Australian GreenPower Providers

After speaking to several folks in the know it was clear the the initial focus should be on insulating the ceiling and installing a solar hot water system.

Contents

Insulating the ceiling (complete)

Given that there is very little storage here I initially thought of using some of the space in the roof for storage. After thinking about some more I decided that the access to the space would be too difficult and there isn't really enough space to make the investment in a pull down stair case worth while. I don't like dealing with particle dust so I chose polyester insulation instead of fiberglass.

It turned out there was 115 square metres of insulation required. I used R3.5 polyester insulation. I had my handy man install it. He took off some roof tiles in order to get the bats into the roof. [reminder to self to add cost info]

Solar hot water (actively investigating)

I investigated solar hot water systems and I read a bit on evacuated tube systems, which claim to be more efficient.

Contact Info

Feel free to contact me at [email protected]

Next steps

Over the next few years I will document the thought processes we go through as we try to make it a more livable and greener home. One of the first initiatives is likely to be capturing rain water. So I have started with an article on Water tanks. The roof looks pretty over grown so I will be trying to clean the green mold off. I am not sure this is necessary, there is probably lots of vitamins in that 50 year old moss. The other thing we are thinking of doing is removing the walls in the centre of the house. The kitchen, living and dining rooms are pretty small. I am having a builder through to figure out if the walls are weight bearing or not.

Personal tools